Bamboo 16 Setup Guide

8 hours ago
Vu Ho
1 minute

 

1. BIOS Configuration

A. Access Advanced Settings

  1. Navigate to Advanced tab.
  2. Go to Power Management Features (located at the end).
  3. Set:
    • Restore from AC → Power ON
    • Press ESC to return.

B. Boot Configuration

  1. Go to Boot tab.
  2. Set UEFI PXE to Enabled.
  3. Press Enter, then press F4, then Enter again.

Note: When the system turns on, press DELETE quickly.

2. Save & Exit

  1. Go to Save & Exit.
  2. Navigate to UEFI (last item in the list).
  3. Press Enter.
  4. Choose Factory POS image → Press Enter.

Wait for a black screen with a beep sound (Tít).
When it appears, press DELETE.

3. Load POS System via IPv4

  1. Save & Exit.
  2. Select UEFI: IPv4 → Press Enter
    (System will auto-start recovery).

4. Windows Setup

A. Change Wallpaper

  1. Go to Owner > Pictures.
  2. Select GoCheckin image.
  3. Right-click and choose Set as background.

B. Sign Out

  1. Right-click on Windows logo.
  2. Select Shut Down or Sign Out → Sign Out.

5. Final Setup in Admin Account

  1. Log in as Administrator:
    Username: Admin
    Password: @Admin!
  2. Open File Explorer:
    • Navigate to:
      Admin > Windows C: > WindowsLogo > setup.exe
  3. Right-click setup.exe, then:
    • Click “!” in the popup.
    • Press Enter.
  4. Restart the system.

✅ End of Setup